Thursday, August 21, 2014

Check Engine Light Facts

Check Engine Light 101


This has probably happened to you at least once. You're driving your car and it is running fine. All of a sudden a red or yellow warning light flashes on "Check Engine". Of course this usually occurs when you need the car most.


What do you do? What does it mean? Is it safe to drive? Is the car going to break down immediately? Is more damage going to occur the more I drive it? Is it going to blow up? It can be an anxious and stressful time when you don't understand what is happening with your car and don't know what to do about it.


Depending on the age of your car, the pesky light may read "Check Engine, " "Power Loss," "Service Engine Now," or "Service Engine Soon." The lights are connected to computers, which monitor engine and transmission sensors to determine if there is a failure in the system that may cause an increase in harmful emissions. The computer system is called On Board diagnostics (OBD).


On Board Diagnostics continuously monitors sensors and actuators. It actively tests some systems for proper operation while the car is being driven, continuously checking for fuel control and engine misfire. Also, once per trip the OBD checks catalyst efficiency, exhaust gas recirculation operation, evaporative system integrity, oxygen sensor response, and oxygen sensor heaters. The "Check Engine Light" or "Malfunction Indicator Light (MIL)" will illuminate if there is a failure in the emissions system. The light will also blink on and off if there is engine misfire severe enough to damage the catalytic converter.


As you can see, many of your car's systems have sensors and actuators that, if malfunctioning, effect emissions and can cause one of these warning lights to come on. That is why, although you may have had a recent repair to turn off the light, other sensors or actuators can malfunction causing the light to come on again shortly. This can become frustrating for the car operator who does not understand what these lights mean or which systems are malfunctioning.


One of the common questions asked is "will my car pass the state emissions test if the check engine light is on?" Unfortunately the car will not pass, and when the light is on you will not even be able to have the emissions tested until the problem is corrected, the computer reset, and the light shut off.


How is the problem diagnosed and repaired? Trouble-shooting requires checking OBD to see if the computer has set a trouble code. This is done either by putting the computer through a self-diagnostic test or by plugging a special scan tool into the diagnostic connector to access the computer.


A trouble code does not necessarily mean a sensor or actuator is bad. It only means a problem has been detected in that particular circuit. It could be the sensor, the wiring, or a connector somewhere in the wiring. To isolate the fault, a sequence of further diagnostic tests usually has to be performed. Intermittent faults are hardest to find, and some sensor problems may not generate a trouble code at all.


It must be added that repairing a problem, because it is a step-by-step procedure, requires that the first malfunction(s) found must be fixed before the system can be tested again. It is not uncommon to find other faults after the first malfunction is repaired, which requires further diagnosis and repair.


In conclusion, although your car may not be about to "blow up," no warning light should be ignored. The problem can be as simple as a loose gas cap or as serious as failure of a component critical to the engine management of your car. An ignored warning light may cost you much more in repairs or leave you stranded on the side of the road. It is always best to have it checked as soon as it occurs.

BMW Repair, Maintenance and Service

Expert BMW Auto Repair Specialist Shop in Brooklyn & Manhattan,NY

New Canaan BMW Repair & Service for New Canaan, Darien, Wilton, North Stamford, Silvermine, Poundridge,NY, South Salem,NY, Vista,NY, Ridgefield and Cos Cob, CT

If you're like us, a BMW is more than a "car". It's a high-performance engine surrounded by a sleek chassis. Adding extras is a labor of affection. We specialize in the maintenance and repair of your European-engineered automobile. Our goal is to perform the BMW service you have requested competently and quickly to achieve complete customer satisfaction. Keeping your BMW vehicle running smoothly and safely requires regular maintenance and timely repair.

We also handle complete suspension and exhaust installations.

At BAY DIAGNOSTIC, we make it our priority to keep your BMW running safely and efficiently with regular service, repair and maintenance. Automotive maintenance is important to keeping your BMW running in top condition and lasting long into the future. We provide 10 - point inspections for your BMW with any service which helps limit the amount of repairs needed on your vehicle.

BMW Repair, Maintenance & Services

Some of the scheduled maintenance & services that your BMW car, truck or SUV may need include:

We have many years of experience in fixing BMWs, along with mechanics that are up-to-date with current technology and equipment. Our knowledgeable and friendly staff, technicians and mechanics are here to help you with all of your BMW's service and repair needs.

Our BMW repair and service shop is located in BROOKLYN,NY. We proudly serve the following areas: New York City, Manhattan & Brooklyn, NY and surrounding areas.

We at baydiagnostic.com. look forward to being your  BMW repair and service shop., give us a call at(718-615-0705) to schedule your next BMW service

Tuesday, August 19, 2014

Wet wiring in LAND ROVER

Don't let Wet Wiring in your
LAND ROVER Worry You
BAY DIAGNOSTIC CAN HELP
Give us a call @ 718-615-0705
Or on line @ Baydiagnostic.com

Sunday, August 17, 2014

Air Filter Replacement - European Vehicles

 WHEN IS THE LAST TIME YOU HAD YOUR FILTER CHECKED.????
 
 
 
         
 
 
 LET BAY DIAGNOSTIC CHECK IT FOR FREE
 
baydiagnostic.com.    

         Try us,   You'll like us!   

Land Rover and Range Rover Expert Repair

Get Range Rover and Land Rover Service By Range Rover And Land Rover Repair Experts @ BAY DIAGNOSTIC


Land Rover service & Land Rover repair

We specialize in Range Rover and Land Rover service and repairs. BAY DIAGNOSTIC is equipped with the Autologic Land Rover Factory Diagnostic System. We are one of few shops in Brooklyn,NY with this professional Land Rover test equipment. This allows us to do anything the dealer can do. At baydiagnostic.com. we also use Genuine Land Rover parts to ensure optimul performance and quality. With over 25 years of experience on Land Rover Vehicles we are familiar and skilled at dealing with their sophisticated systems. We perform a complete Manufacturer Specification Service Check, Up to 27checks performed plus extra checklist at no extra charage (not like the DEALER )

Expertise
  • Air Suspension Systems
  • ABS Control Systems
  • Engine and Computerized Systems
  • Cooling System
  • SRS (Airbag) System
  • Valve Job
  • Cylinder Heads
  • Sealing
  • and remember... Anything the dealer can do so can we!
  • High Quality Oil and Quality Parts Genuine Parts only!

We specialize in Land Rovers and we are your dealer alternative!

REMEMBER  BAYDIAGNOSTIC.COM OFFERS FREE PICK UP & DELIVERY of your LAND ROVER

Give us a call @718-615-0705 or visit us @ baydiagnostic.com

Tuesday, August 12, 2014

Alternator Issues

When faced with an illuminated charge light diagnosis on most late-model vehicles, do not automatically assume the problem is inside the alternator and potentially unserviceable. The problem could be the pulley and belt drive system. Neglecting to test and diagnose the pulley can lead to unnecessary replacement.  

Almost every late model car or truck is equipped with an overrunning alternator pulley (OAP) or an overrunning alternator decoupler (OAD). An OAP is a one-way clutch like a socket wrench that turns in one direction and locks when turned the other direction. An OAD operates in the same manner, but has a special clutch and spring that absorbs vibration to smooth out vibrations in the drive belt system. Regardless of the type, the pulley should be checked before condemning and removing the alternator.

These new pulleys allow the alternator to “free-wheel” or “overrun” when the belt suddenly slows down. This prevents the belt from slipping and reduces vibration. Best of all, the system need less tension and even a narrower belt can be used. This can result in a 1.5% to 2% fuel economy improvement. However, these pulleys have a limited lifespan due to how they operate internally.  

OADs and OAPs behave the same, except the OAD will have a “spring feel” because of the internal spring. Testing can be performed on the vehicle with the belt attached.



Questions?   Call us at 718-615-0705.  


Visit us on the web at baydiagnostic.com 

Land Rover/ Range Rover Service



 Land Rover / Range Rover

Automobile Maintenance and Service Schedule

Land Rover vehicle owners love the comfort of their rugged terrain SUV and regular maintenance and service will keep it running to optimum performance. The Land Rover comes equipped with a Driver Information Module, which will alert owners of an upcoming service interval, which will be based on both time and distance. In addition to routine maintenance, simple checks should be carried out frequently.




SO GIVE BAY DIAGNOSTIC A CALL  718-615-0705 and see what others have known for over 25 years.........c



or visit us on the web @.        www.baydiagnostic.com